Roof Cleaning Newcastle

A proper roof clean removes lichen, moss, dirt and salt from tile and metal roofs, clears leaves and debris from valleys and gutters, and leaves the roof draining the way it should. We do not currently offer roof cleaning as a standalone job. We clean roofs as the first stage of a roof restoration, where the standard is higher because the new coating depends on it. This page explains what a good clean involves, and if we see something that needs repair while we are up there, we tell you and let you decide.

We do not currently offer roof cleaning as a standalone service. It is done as part of a roof restoration. If your roof is past restoring, see roof replacements.

What's Included

  • Roof washing
  • Debris removal
  • Gutter and downpipe flush
  • Condition notes
  • Clean up

Not sure if roof cleaning is what you need?

We inspect first and tell you straight: repair, restore or replace.

Book a Free Inspection β†’

Why a clean roof matters

A dirty roof is more than a cosmetic problem. A proper clean restores drainage, removes growth that holds moisture against the surface, and makes it easier to spot small problems early. Roofs under mature trees, on shaded southern faces, or near bushland around Lake Macquarie and the western suburbs tend to collect leaves and grow lichen faster. Homes close to the coast can build up salt on sheltered areas. We do not offer maintenance cleans on their own, but cleaning is the first stage of every roof restoration we do, and it is where cracked tiles, failed ridges and rusting fixings show themselves. If a roof needs less than a restoration, we tell you that too.

  • Lichen and moss hold moisture against tiles and can block water channels
  • Leaves in valleys and gutters are a common cause of overflow in heavy rain
  • Salt on sheltered areas of metal roofs can speed up corrosion if left
  • A clean roof makes cracked tiles and failing fixings easier to spot
Illustration: weathered grey tile roof with lichen and dirt, the kind of roof that needs a clean

Roof washing for tile roofs

Concrete tiles are porous once their surface wears, so they hold dirt and grow lichen readily. We wash them with a pressure cleaner, working down the roof so water runs with the laps rather than being forced up under them. Pressure is matched to the tile: older concrete and unglazed terracotta tiles can be eroded or cracked by too much pressure, while glazed terracotta needs a gentler approach to avoid damaging the glaze. Where lichen is heavy, a treatment applied after washing can help slow regrowth. We walk tile roofs carefully and replace any tile broken during the clean. If the surface is badly worn, we will point out that cleaning alone will not stop it absorbing water.

Cleaning metal roofs

Metal roofs need a lighter touch. Too much pressure can damage the paint on older Colorbond or strip weathered coatings, so we use lower pressure and soft washing where needed. The focus is on removing dirt, organic growth and salt, and on the areas that rain does not reach: under eave overhangs, behind parapets, below solar panels and under higher roof sections. For homes near the city and the beaches, those sheltered areas are where salt tends to build up, and the manufacturer recommends washing them regularly. We also clear the metal filings sometimes left behind by other trades, which rust and stain the roof surface if they stay.

Debris removal from valleys, gutters and roof junctions

Debris collects where water is supposed to flow. Valleys, the gaps behind chimneys and skylights, box gutters and eaves gutters all trap leaves and grit. When a heavy downpour hits, those blockages send water sideways under tiles, over the back of gutters and into eaves and walls. We clear debris by hand where needed before washing, then flush the gutters and check downpipes run freely. If the gutters themselves are damaged or sagging, or if gutter guard would help on a property surrounded by trees, our gutters and downpipes page covers that work.

Surface preparation before a coating

When cleaning is the first stage of a coating job, the standard is higher. Every trace of lichen, loose coating, chalky residue and dirt must come off, because coatings will not bond to a contaminated surface. On metal, rust must be treated and loose paint removed; on tiles, the surface must be sound and completely dry before the sealer goes on. That work is included in our roof restoration quotes rather than priced as a separate clean.

Roof cleaning on its own or a roof restoration?

Both start with washing the roof. We clean roofs as part of a restoration, not as a separate job.

Cleaning on its ownRoof restoration
PurposeKeep a sound roof clean and drainingBring a worn roof back to good order
WashingRemove growth, dirt, salt and debrisFull preparation clean, every trace of loose material removed
RepairsNot includedIncluded: tiles, fixings, ridges
CoatingNoneIncluded
Offered by usNo, not as a standalone serviceYes, quoted in writing after inspection

How the work is done

How the cleaning stage works

  1. 01

    Quote

    We look at the roof, the material, access and how much growth and debris there is, and include the clean in the restoration quote.

  2. 02

    Protect

    Downpipes are managed, and nearby windows, cars and garden beds are protected from splash.

  3. 03

    Clear debris

    Leaves and grit are removed from valleys, junctions and gutters by hand where needed.

  4. 04

    Wash

    The roof is washed top down with pressure matched to the tile or metal, including sheltered areas.

  5. 05

    Flush and check

    Gutters and downpipes are flushed, and we note anything that looks like it needs attention.

  6. 06

    Clean up

    Paths and walls are rinsed, and we pass on our notes on the roof's condition.

What the job covers

What the roof cleaning stage of a restoration covers

One written quote

Every item is set out in the quote you receive after inspection.

  1. 01

    Roof washing

    Tiles or sheets washed with pressure suited to the material to lift lichen, moss, dirt and grime.

  2. 02

    Debris removal

    Leaves, twigs and built up grit cleared from valleys, behind chimneys, around vents and along gutters.

  3. 03

    Gutter and downpipe flush

    Gutters cleared of washdown and debris and downpipes checked so the runoff does not block them.

  4. 04

    Condition notes

    Notes on anything we spot while on the roof, such as cracked tiles, loose ridges or rusting fixings.

  5. 05

    Clean up

    Paths, walls and garden beds rinsed of splash and debris before we leave.

Let's take a look

Free on-site inspection and a written quote for the work you actually need.

πŸ“ž (02) 4047 0860

Straight about price

What does it cost?

We do not offer roof cleaning on its own, so there is no separate cleaning price: the clean is priced within a roof restoration quote. What it adds depends on the roof's size, its pitch and access, whether it is tile or metal, its condition, how much lichen and debris there is, whether gutters need clearing, and whether a treatment to slow regrowth is added. A two-storey roof or a steep pitch takes more time and safety setup than a single-storey roof. Every roof is different, so your exact price is confirmed in writing after a free on-site inspection.

Questions before you enquire

Roof Cleaning questions

Straight answers to what homeowners ask us most about roof cleaning.

How often should a roof be cleaned?

It depends on the roof and its surroundings. Roofs under trees, near bushland or in shaded spots grow lichen and collect debris faster, and roofs near the coast build up salt. Many homes only need an occasional clean, with gutters cleared more often. We can tell you what we see when we inspect the roof.

Can pressure cleaning damage my roof?

It can if the pressure is wrong for the material. Older concrete tiles, unglazed terracotta and painted metal all need different settings. We match the pressure to the roof, work with the laps rather than against them, and replace any tile broken during the clean.

Will cleaning stop my roof leaking?

Sometimes, if the leak was caused by blocked valleys or gutters overflowing. If the leak comes from a cracked tile, loose ridge or failed fixing, cleaning will not fix it. We will tell you what we find and quote any repair separately.

Do you clean roofs without painting them?

Not at the moment. We do not currently offer roof cleaning as a standalone service: we clean roofs as the first stage of a roof restoration, which also covers repairs and a new coating. If your roof does not need a restoration, we will tell you so.

Can you clean a metal roof without damaging the paint?

Yes. We use lower pressure and soft washing on metal, and focus on dirt, growth and salt rather than blasting the surface. Paint that is already failing may lift, and we will point that out before we start.

Do you clean the gutters as part of a roof clean?

Yes. When we clean a roof as part of a restoration, gutters are cleared of debris and washdown, and downpipes are checked so they run freely. If the gutters need repairs or replacement, that is quoted separately through our gutters and downpipes service.

Does a roof clean include a condition check?

We note anything we see while working, such as cracked tiles, loose ridge capping or rusting screws, and pass those notes to you. It is not a formal written roof report. For a detailed condition assessment, see our roof inspections page.

Request an inspection

Ready for honest advice?

Free on-site inspection, written quote, and a straight answer: repair, restore or replace. Call (02) 4047 0860 or use the form.

GET YOUR FREE
QUOTE

Written quote after inspection. Free of charge.

  • βœ… Local Team
  • βœ… Written quote

πŸ•– Mon to Sat: 7:30am to 5:30pm

Prefer to talk? Call (02) 4047 0860

πŸ“ž Call NowFree Quote β†’